EIGRP Redistribution With Different AS
In this article I will explain how texternal Eigrp Redistribution with Different AS is used. I will write down all the configuration I have done step by step. I have done this Eigrp Redistribution with Different AS practical on Cisco Packet Tracer. Also note that I have already done assigning Ip address to the interfaces. So lets get started.
In this diagram you can see Router A has AS 10 and Router C has AS 20. Whereas Router B will act as ABR(Area Border Router) acting as intermediary between Router A and Router C.
READ ALSO:- WHAT IS STATIC ROUTING?
READ ALSO:- WHAT IS DYNAMIC ROUTING?
EIGRP Redistribution Commands And Configuration
EIGRP Configuration Command On Router A:
RouterA(config)#config t
RouterA(config)#router eigrp 10
RouterA(config-router)#network 10.0.0.0 0.255.55.55
RouterA(config-router)#network 192.168.10.0 0.0.0.255
EIGRP Configuration Command On Router C:
RouterC(config)#config t
RouterC(config)#router eigrp 20
RouterC(config-router)#network 20.0.0.0 0.255.55.55
RouterC(config-router)#network 192.168.20.0 0.0.0.255
EIGRP Redistribution Configuration Command On Router B:
RouterB(config)#config t
RouterB(config)#router eigrp 10
RouterB(config-router)#network 10.0.0.0 0.255.255.255
RouterB(config)#exit
RouterB(config)#router eigrp 20
RouterB(config-router)#network 20.0.0.0 0.255.255.255
RouterB(config)#router eigrp 10
RouterB(config-router)#redistribute eigrp 20
RouterB(config-router)#ex
RouterB(config)#router eigrp 20
RouterB(config-router)#redistribute eigrp 10
READ ALSO:- WHAT IS STATIC ROUTING?
READ ALSO:- WHAT IS DYNAMIC ROUTING?
VERIFICATION:-
you can verify it by using command #show ip route on RouterA.
you will find the other AS eigrp Routes with EX Tag(External Eigrp implemented).
0 on: "EIGRP Redistribution With Different AS(Autonomous System) Example: Practical"